! ==========================================
! Switch S1 Configuration
! Lab: Configuring Layer 2 EtherChannel with LACP (PTL-0006)
! ==========================================
enable
configure terminal
hostname S1

! Management Interface
interface vlan 1
 ip address 192.168.1.11 255.255.255.0
 no shutdown
 exit
ip default-gateway 192.168.1.1

! Bundle Physical Interfaces into Channel Group 1 (LACP Active)
interface range FastEthernet0/1 - 2
 switchport mode trunk
 channel-group 1 mode active
 exit

! Logical Port-channel Interface
interface Port-channel 1
 switchport mode trunk
 exit

end
copy running-config startup-config