! ==========================================
! Router R2 Configuration
! Lab: Dual-Stack IPv4 and IPv6 Static Routing (PTL-0001)
! ==========================================
enable
configure terminal
hostname R2

! Enable IPv6 Routing Globally
ipv6 unicast-routing

! WAN Transit Interface
interface GigabitEthernet0/0/0
 description Point-to-Point Link to R1
 ip address 209.165.200.226 255.255.255.252
 ipv6 address 2001:db8:feed:224::2/64
 no shutdown
 exit

! LAN Interface
interface GigabitEthernet0/0/1
 description LAN Connection to Switch S2
 ip address 10.1.1.10 255.255.255.0
 ipv6 address 2001:db8:cafe:1::10/64
 no shutdown
 exit

! Static Routes to Remote LAN
ip route 192.168.10.0 255.255.255.0 209.165.200.225
ipv6 route 2001:db8:acad:10::/64 2001:db8:feed:224::1

! Device Administration and Security
enable secret cisco123
banner motd # Authorized Access Only! #
line console 0
 password conpass
 login
 logging synchronous
 exit
line vty 0 4
 password vtypass
 login
 exit
service password-encryption
end
copy running-config startup-config